Bearing storage

As long as the relative humidity of the storage room does not exceed 60% and the temperature does not change much, the bearing can be stored in the original packaging for several years. Sealed bearings or bearings with a dust cover may have reduced lubrication properties of the grease filled in the bearing after prolonged storage. The storage room should also be protected from vibration and shaking.

Bearings not stored in the original packaging should be properly stored to prevent corrosion and contamination.

Large rolling bearings can only be placed flat when stored, and the sides of the inner and outer rings are preferably all supported. If it is stored upright, the inner and outer rings and the rolling parts are heavy, and the inner and outer rings are relatively thin, which may cause permanent deformation.

Bathtub Mixers

A bathtub faucet is a device used to control the flow of water in a bathtub. It usually consists of a metal rod and a rotary control handle. The handle can be turned clockwise or counterclockwise to control the switch and temperature of the water flow. When the handle is in the off position, the faucet will stop running. When the handle is turned counterclockwise, the faucet will gradually open and the water flow will increase. At the same time, the left and right movement of the handle can adjust the water temperature, allowing the user to get the hot or cold water they need. The design of the bathtub faucet is simple and practical, and the operation is convenient, which can meet the needs of people in the bath.

Bathroom Mixers,Lever Bathroom Mixer tap,Single Lever Bath Mixer,bathtub faucet,bathtub mixer

Kaiping City Kaipu Sanitary Ware Co.,Ltd. , https://www.china-kpo.com