When the centrifuge is in the pre-cooling state, the centrifuge cover must be closed. After the centrifuge is finished, the rotor should be placed on the test bench, and the residual water in the cavity should be dried. The centrifuge cover is in the open state. When the centrifuge is in the pre-cooling state, The centrifuge lid must be closed. After the centrifugation is finished, the rotor should be placed on the test bench and the residual water in the chamber should be dried. The centrifuge lid is open. Metal sheet & tube Laser Cutting Machine available for metal plate and tube cutting in various materials such as stainless steel, carbon steel, alloy steel, spring steel, copper, aluminum, gold, sliver, titanium etc. Metal Sheet & Tube Laser Cutting Machine Laser Tube Cutting Machine,Metal Laser Cutting Machine,Metal Laser Cutter,Laser Cutter Jinan Huaxia Machinery Equipment CO.,Ltd , http://www.cnmetalcutting.com
Second, the centrifuge rotor head can be placed on the platform of the centrifuge when pre-cooling, or placed on the test bench, must not be screwed on the rotor, because once the start, the rotor The cover will fly out, causing an accident!
3. After the screw cap is tightened, be sure to touch the gap between the rotor and the cover with your fingers. If there is a gap, unscrew and retighten until the gap is confirmed before the centrifuge can be started.
4. During the centrifugation process, the operator must not leave the centrifuge room. If an abnormal situation occurs, the operator cannot turn off the power supply.) Press STOP. Fill in the centrifuge usage record before pre-cooling.
5. Do not use fake centrifuge tubes, and do not use aging, deformed or cracked centrifuge tubes.
6. Can leave after the last routine safety check using a centrifuge on holidays and evenings. 7. In the event of machine failure during the use of the instrument, contact the technician in time for damage to the component. Http://news.chinawj.com.cn Submission:
Metal sheet & tube laser Cutting Machine advantage:
1. Auto - focus
Applicable to various focal lengths, which are controlled by machine tool control system. Focal point will be automatically adjusted in cutting process to achieve the best cutting effect of different thicknesses sheets metal.
2. Free
Focal length is controlled by operating system. We don`t need to do manual regulation, which effectively avoids errors or faults caused by manual operation.
3. Fast
Auto focus would automatically adjust the most appropriate focal points in the process of punching and cutting, which greatly improves cutting speed;
4. Accuracy
Metal sheet & tube laser cutting machine with increasing perforation focus length, separately setting perforation focal length and cutting focal length, enhance cutting accuracy.