Convex point steel-plastic grille introduction convex point steel-plastic grid product description: Sanitary Sight Glass Sanitary Sight Glasses Sanitary Sight Glasses,Stainless Steel Sight Glass,Sanitary Tank Sight Glasses Kaysen Steel Industry Co., Ltd. , http://www.chinasanitaryvalve.com
The bump-shaped steel-plastic grille is an upgraded product of the ordinary steel-plastic geogrid, which changes the small peeling force of the ordinary grille node, the solder joint is easy to crack, the construction is difficult, and the effect of preventing the side shift is reduced. And further improved products. Due to the material ratio and the change of the construction process, the peeling force of the welded joints is between 500 and 600, effectively changing the above shortcomings of the traditional steel geogrid. Because the joints of the welded joint are convex, it is called a convex point plastic-plastic geogrid, and the academic name is a joint-reinforced steel-plastic geogrid.
Convex point steel-plastic grille product introduction:
The convex point steel-plastic grille, also known as the lacing strip grille, is a high-strength strip wrapped by high-density polyethylene, which is supersonic welded and changes the tension of the strip according to engineering needs.
a. Through the extrusion process of the plastic surface in the production engineering, rolling into the concave and convex pattern, increasing the strength of the welding point and increasing the friction coefficient of the surface of the rib belt, these effects make the composed steel-plastic composite geogrid resistant to the filler. The horizontal shear force improves the formation of the fracture surface of the soil with the soft foundation bearing capacity and meets the requirements of the project permanent construction.
b. Convex point steel plastic geogrid specifications and models according to the direction of the tension, there are one-way and two-way points, the convex point of the plastic geogrid per square meter tensile yield force of 30 to 200 cattle, can be Based on user needs.
Convex point steel plastic grille features:
a. Creepable small elongation is low.
b. Convex point steel-plastic geogrid is corrosion-resistant and has a long service life: it is supplemented with various additives to make it resistant to aging and oxidation, and can withstand corrosion in harsh environments such as acid, alkali and salt. Therefore, the steel-plastic geogrid can meet the needs of various permanent projects for more than 100 years, and has very good stability.
c. Convenient and fast construction, short cycle and low cost: the laying, lap jointing and positioning of steel-plastic geogrid are easy and smooth, avoiding overlap and crossover, which can effectively shorten the engineering cycle and save 50% of the project cost. Engineering application areas: soft soil foundation reinforcement, retaining wall and pavement anti-cracking engineering for roads, railways, bridges, approach roads, wharfs, dams, slag yards, etc.
d. High strength, small creep, adapt to various types of environmental soil, can fully meet the use of highways, railways, and high retaining walls. 2, very effective increase the bearing surface of the interlock, bite cooperation, greatly enhance the bearing capacity of the foundation, safe and effective lateral displacement of the constrained roadbed, and stabilize the durability.
e. Convex point steel plastic geogrid has the characteristics of high strength, high bearing capacity, no corrosion, aging resistance, large pattern friction coefficient, uniform hole, convenient construction and long service life.
Convex point steel plastic grille use:
Engineering application areas: soft soil foundation reinforcement, retaining wall and pavement anti-cracking engineering for roads, railways, bridges, approach roads, wharfs, dams, slag yards, etc.
Convex point steel-plastic grid product construction method:
a. The laying surface of the geogrid should be relatively flat. After the experience of the laying layer is accepted, in order to prevent the longitudinal skew phenomenon, the white line or the hanging line is first drawn according to the width of the laying layer, then the laying can be started, and then the U-shaped nail is used. Fix the end of the grille (4 nails per meter wide, uniform distance fixed);
b. After fixing the end of the grille, use the laying machine or manual method to slowly pull the grille forward, and manually survey once every ten meters, until the roll of the grille is finished, and then roll the next roll. Operation as before;
c. Pick-up: take the length of the section as the length of the pavement. After the length of the section of the grille is covered, check the quality of the paving. Then lay the next section. When laying the next section, the grille and grid The grid overlaps with a grid clearance as the overlap length, and is fixed by the tie line and continues to lay the second section in the forward direction. By analogy, the operation requirements are the same as before.
Contact: Hou Manager Address: Shandong Taian Telephone Mobile Fax: [email protected]
Company website: http:// geshan123.chinawj.com.cn
Http://
Http://news.chinawj.com.cn Submission:
Sanitary Sight Glass made of SS304 or SS316L, and from size 1″ to 4″. Being able to look into the flow status of a pipeline, and monitor the fluid without opening or unassembling the installation. Sanitary sight glass is widely used in brewery, dairy, food, cosmetic, bio-pharmaceutical industries. Kaysen sanitary fittings is ability to supply sanitary sight glass, Sanitary Sight Glasses, Stainless Steel Sight Glass, Sanitary Tank Sight Glasses with excellence service and good quality, and customized fabricated is available.
Sanitary Sight Glass – Stainless Steel Hygienic Tank Fittings
â–ª Size: 1" - 4"
â–ª Material: SS304, SS316L, 1.4301, 1.4404
â–ª Types of Sanitary Sight Glass:
Sight glass with Protection,
Four-way sight glass,
Union sight glass,
Flanged sight glass etc.
â–ª Connection: Tri-Clamped, Threaded, Welding, Flanged etc.
â–ª Standard: 3A, DIN, SMS, BS, ISO, BPF, ISO, IDF etc.
â–ª Application: Food, Brewery, Beverage, Dairy, Pharmaceutical, Fine chemical, Cosmetic etc.