The special pumps in the Botuo Stainless Steel series are high-pressure with an 250 Bar to 1500 Bar 21-76 Litre stainless steel head. They are ideal for use in the food, chemical and pharmaceutical industries. The special pumps in the Botuo Stainless Steel series, stainless steel pressure washer pump, are also used in reverse osmosis systems, a procedure for purifying water used in particular in the food industry because it is able to remove pollutant particles from water without altering the mineral sources that are of particular importance for the body. Stainless steel is used as the main component because it is particularly corrosion resistant, and the inside has oversized tapered roller bearings able to guarantee longer duration. All the pump models produced by Leuco are renowned worldwide for their efficiency and reliability and the high quality of the materials used. botuo pumps also offers an efficient customer service able to provide all kinds of assistance and clarification. Stainless Steel Plunger Pump,Stainless Triplex Plunger Pump,Triplex Stainless Steel Pressure Pump Zhejiang Botuolini Machinery Co.,Ltd , https://www.chinaplungerpump.com
2. The operation process first determines which type of hot melt welding machine you need based on the environment you want to construct. For example, it is more suitable for use in the groove ground with a hand-push hot melt welding machine. We first place the machine in the groove area, lay it flat, and remove the surrounding rocks.
*Step: Take two PE110 pipes you need to weld, place them on both sides of the hand-push welding machine, and fix them with clamping tiles.
Step 2: Align the two tubes so that they are kept on the same water surface.
Step 3: Put the milling cutter on the machine, use your hand to push the two iron rods on the machine, push the clamp rings forward and backward, and just mill a continuous belt.
Step 4: Modify the heating plate at about 220° and put it in the middle of the two tubes, and then push the clamping ring to make it flip.
Step 5: Quickly remove the heating plate and use the iron rod to push the clamp ring to keep it fixed and cool to complete welding.
3. Precautions to ensure that the power input connection part meets the standards to avoid contact with any live devices. Avoid pulling the plug and cutting off the power supply. Do not use cables to directly drag the equipment. Do not use the welding machine in a humid environment. Please place it in a cool place.
The operating steps of the PE hot melt hydraulic butt welding machine can be roughly divided into eight steps: preparation, placement, fixing, milling, centering, heating, welding, and cooling.
*Step: Prepare, prepare the pe pipe hot melt welding machine, including hydraulic stations, milling cutters, heating plates and other related power supplies, and place the docking frame smoothly;
Step 2: Place the two sections of pe pipes that need to be welded in the butt rack, and connect them in the middle of the four fixtures of the butt rack.
Step 3: Fix, close the upper and lower brackets of the butt rack, and fix the pe pipe with bolts.
Step 4: Milling, take out the milling cutter from the basket, place it in the middle of the two pipes, push the joystick of the hydraulic station, contact the two pipes with the milling cutter until the two connecting planes are milled and continuous long strip-shaped debris are milled.
Step 5: Centering, because the fixed pipe may be offset during the milling process, you must center again and adjust the wrong edge amount. Of course, you must also be careful not to contaminate the port, otherwise milling must be carried out again.
Step 6: Heat, put the milling cutter back to the basket, and take the heating plate out of the basket and put it in the middle of the two pipes for heating. After the two pipes start to flip and meet the requirements, put it back to the heating plate.
Step 7: Welding. After taking out the hot plate, immediately close the PE port to be welded according to the required pressure.
Step 8: Cooling is completed.
1. Introduction to the principle. Hot melt welding machine is a special welding equipment that uses hot melt butt technology to weld thermoplastic pipe fittings. The welding frame of the hot melt welding machine is separated from the operating system. According to the different methods of use, it can be divided into five types: manual, hand crank, hand push, hydraulic semi-automatic, and fully automatic; each type selects different welding tools for different welding environments and different operating conveniences.