Renovation Company Aisle Ceiling Furniture Home Decor Building Materials Market Decoration Company Kitchen Kitchen Furniture Partition Cabinet Counter Kitchen Cabinet Door Aluminum Balcony Railing,Railing,Railing Price Ornamental Fence Co., Ltd. , http://www.nsafence.com
Cabinet mounted on the load-bearing wall, the best "cabinet installed on the load-bearing wall is best." Sun Yurong explained that the cabinet in the hanging position itself has a certain weight, and to bear the weight of the bowls and pans, etc., for the sake of safety, As far as possible choose to install on the load-bearing wall. However, some walls may themselves be load-bearing walls, but the insulation layer is very thick, so that the expansion bolts can be fixed and connected. Therefore, although the cabinet is hung on the insulation layer, the bearing is actually on the load-bearing wall. Even if cabinets can only be installed on non-load-bearing walls, there is no need to worry too much. "As long as it is handled, it is basically safe." Sun Yurong said.
"The safest thing is to use special accessories." Zhou Qingzhong engineer said that if all four walls are non-load-bearing walls, but the ceiling is generally made of reinforced concrete, have a larger bearing capacity. The iron swell bolts can be fixed on the floor, fixed on the wall, and then hang the cabinets directly from the ceiling. "This is safe."
The three measures to deal with non-bearing wall special pendant will be transferred to the load-bearing wall floor, this is of course safe, but Sun Yurong believes that from the overall aesthetic effect of the house, the reinforcement of non-bearing wall or the use of imported cabinets mounted crane The code hanging piece is still the best.
According to its introduction, for a non-load-bearing wall sandwiched or partitioned, it is possible to use a box whiteboard or a thicker whiteboard on the wall to fix it on the wall to reinforce and thicken the wall. If the bearing capacity of the non-bearing walls is too low, U-shaped plates can be used to fix the whiteboard with other load-bearing walls, and the stress points can be transferred to other load-bearing walls and cabinets can be installed. "But this is more difficult to process and install. It requires an experienced and thoughtful installer." This method is safe and convenient, and the cost is very cheap.
Hanging code hanging piece is a kind of iron piece with even hole position on it. It is used less during installation. It is generally more special to use it. For example, there is a pipe on the wall, and the cabinet cannot be fixed if the expansion bolt is not long enough. It is vacant; or the hydroelectric route passes through the wall and cannot be fixed directly. However, this kind of coupon is expensive, about 300 dollars, and it is difficult to buy in the building materials market.
Zhou Qingzhong introduced that the wall could be pre-treated by hanging wire mesh. If it is a circular hole plate wall, it is necessary to block the holes in advance. The construction worker will consider hanging a wire mesh on a wall that cannot reach a certain level of nail holding power. First, fix a wire mesh of about 1 meter on the wall, apply a layer of ash, and then stick the brick. The whole process is relatively simple, which can increase the integrity of the wall and reinforce the wall. The whole process costs about 150 yuan.
Indispensable for the kitchen as a whole. There are different ways to handle the non-load-bearing walls. However, during the actual installation of the cabinets, the two experts stressed that it is necessary to take into account various factors and need to have a holistic kitchen awareness.
Zhou Qingzhong stressed that the yin and yang corners of the tiling must be founder, or else the oblique gaps will appear after the cabinets are placed on the countertops. This is not only beautiful but also very chilly. Sun Yurong believes that the hood must be very close to the vent, otherwise, over time, the hood will affect the ventilation too long; and the water pipe is also a problem that needs attention. According to reports, many people install the basin in a place away from the sewer for beauty or ease of operation. In this way, after a long period of time, it is inevitable that there will be choke leaves, greasy things blocking the pipeline, and the longer the pipeline, the blocked The greater the chance.
Cabinets are best installed on load-bearing walls, but due to design flaws, many residential kitchens are non-load-bearing walls. Is it safe to install cabinets on non-load-bearing walls without changing the wall structure? Many readers not only do not understand, but are still very uneasy. What should you watch out for when installing cabinets? The newspaper invited two experts, Sun Yurong, manager of Beijing Taste Baizi Furniture Co., Ltd., and Zhou Qingzhong, engineer of Yifengfeng Decoration Company, to give you advice.