Plate entrance decoration formaldehyde decoration decoration company interior decoration decoration decoration company okay cabinet door Si3N4 ceramic is an important structural material. It is a kind of super-hard material. It is lubricious and wear-resistant. It does not react with other inorganic acids except hydrofluoric acid. It has strong corrosion resistance and resistance at high temperature. It is also resistant to thermal shock. It is heated to above 1,000 °C in air, and is rapidly cooled and heated rapidly without cracking. It is precisely because of the excellent properties of Si3N4 ceramics that it is often used to make bearings. Mechanical components such as gas turbine blades, mechanical seal rings, permanent molds, etc. If the Silicon Nitride Ceramics with high temperature resistance and heat transfer resistance are not used to manufacture the heating surface of engine parts, not only can the diesel engine quality be improved, fuel can be saved, but thermal efficiency can be improved. Silicon Nitride Ceramic Plate,Nitride Ceramic Sheet Picker,Silicon Nitride Ceramic Strip Plate,Silicon Nitride SHENZHEN HARD PRECISION CERAMIC CO.,LTD , http://www.hardcm.com
New concept promotes market transformation
The retail market for wooden boards is declining. Analysis of the industry, the main reasons are three points: First, the "light decoration, re-decoration," the popularity of the idea, so that the number of models in the home improvement project, the amount of plates will also decline; followed by more and more home improvement projects integrated, wooden doors, wardrobes Wood products made by the factory, but not on the scene by the carpenter's production, reducing the amount of plate; again is the "half a bag" decoration model of the popular, wooden plates and other accessories to the decoration company purchasing, consumers do not have to buy their own.
Green is the most watched
It is understood that the current international limit of formaldehyde release is divided into E0, E1, E2 three levels, namely E0 level (free formaldehyde release limit) ≤ 0.5mg/L; E1 level ≤ 1.5mg/L; E2 level ≤ 5.0mg/ L. According to the national mandatory regulations, the amount of formaldehyde released from indoor panels must meet E0 or E1 standards. In order to meet the requirements, many small factories also claim that their products are E0 and E1 products. However, environmental protection plates have very high technical and equipment requirements for manufacturers, and plates in the market are basically environmentally friendly products that meet national standards.
Whether the plate is environmentally friendly or not, the key is glue. Basically, the large core boards, plywood, and particleboards currently sold on the market use formaldehyde-containing urea-formaldehyde glue. Normally, the glue used for an E1-class core board is about 5 pounds, and some manufacturers use adhesives to increase adhesion. Intensity, the use of urea-formaldehyde rubber in large quantities, resulting in uncontrolled release of free formaldehyde in the sheet, resulting in excessive formaldehyde. There are also some non-standard manufacturers in order to control the cost, add a lot of benzene and phenol in the glue, resulting in excessive phenol content, TVDC exceeds the standard eventually lead to pollution. Therefore, it is best for consumers to go to the formal market to purchase branded products. Don't be fooled for the cheap. The materials that are sold at low prices are usually materials that are crudely made and formaldehyde is seriously exceeded.
Consumers must strictly control quality
It is understood that although most of the accessories such as sheet metal are purchased by the decoration company, not all of the decoration companies will use environmental protection plates. The plates used by some big brand decoration companies can meet the national standards, and some non-standard small companies still save costs. Use products that do not meet national standards. Therefore, when decorating consumers, consumers must not take any lighter measures on wood-based materials. When signing a decoration contract, they should definitely use E0 or E1-grade products, or sign a guarantee that harmful gases in the plate will not exceed national standards. Environmental protection contracts to protect their own rights and interests.
With the change of consumer decoration concept, the idea of ​​“light decoration and heavy decoration†is deeply rooted in people’s minds. The “all-inclusive†and “half-pack†decoration modes are becoming more and more popular. The main customer base of wooden plates is also being quietly directed by retail customers. Decoration companies, furniture cabinets, and other industry customers change. However, there is a point to remind consumers that the quality of wooden panels is directly related to the environmental protection of home improvement projects. When signing a “half package†contract with a decoration company, it must not be a “passing dispenser†and it is necessary to carefully inspect various types of products. The quality of wooden boards, in the contract, strictly stipulates technical parameters such as the brand and environmental protection indicators of the boards to safeguard their own rights and interests.