First, the inadequate layout of the small and powerful units is small, but fully-equipped. Because the occupants are mostly young people, they have a high degree of dependence on computer networks and their lives are arbitrary. Therefore, small-sized units have very strict requirements on circuit layout. It is necessary to fully consider the various needs of use. In the early design period, we should make sure that neither the rich nor the lacking, and avoid the lack of interface after the late furniture and pattern changes.
Second, the dull wall color small family generally choose the brightness and purity are higher color. Because the more intense the purity of color, the more you see it first, the higher the lightness and the more malleable on the senses, which are what we commonly call “broad and bright.”
Third, the complex ceiling ceiling type houses are mostly short, the smaller ceiling decoration should be the first choice, or simply do not ceiling. If the ceiling shape is too regular, the spatial area of ​​ceiling will be too strong.
Fourth, the space of the floor-decorating units in the divided areas is small and crooked. Many people use the different material heights in different areas to decorate them and highlight the sense of the area. China also tends to respond to them, which has caused more twists and turns. The spatial structure and derived many "corridors" cause visual obstruction and space waste.
Fifth, the hard partition of a small apartment decoration should be careful to use rigid partitions, if not necessary, do as little as possible rigid partitions, such as a certain need to do, you can consider using a glass partition.
Sixth, monotonous light ceilings are simple in shape, and the sense of regional boundaries is not strong. This virtually causes greater difficulties for the selection and use of lamps. People tend to put one or more main lights on and appear too monotonous. The light of the small space should be lighted by the Lord. The main light is mainly composed of simple ceiling lamps, supplemented by table lamps, wall lamps, and spotlights. To emphasize the functionality and layering of lamps, different light sources can be used interchangeably.
VII. The selection of oversized furniture for small-sized furniture should be based on practicality and smallness. It is not appropriate to choose particularly large furniture and accessories. Purchasing follows the principle of "Ning small not big". Also consider the storage function. There should be a drawer around the bed, and the closet should be narrow and multi-layered, such as a tie, a belt, a coat, and so on. It is best to plan the dimensions of the furniture on the drawings before choosing to purchase.
VIII. The structure of small units without permission to demolition and modification of space structures is generally more complicated. Many people blindly remove the load-bearing walls, air ducts, and flue ducts or change the water, electricity, and gas regardless of the structure. In doing so, it will cause nodes and cracks, while it will affect the load-bearing structure of the entire building and shorten its service life.
IX. The blind use of mirrors Mirrors are widely used in narrow spaces due to the reflection of reference objects. However, the rational use of mirrors is a difficult problem. Too many mirrors can make people feel dizzy. To select the appropriate location for embellishment, such as in the blind corners of the visual or dark corners, it is appropriate to arrange them in blocks or strips. Avoid mirrors of the same area in two-by-two, that will make people feel uncomfortable.
10. Electric refrigerators that occupy too much space should not be greedy for large pictures. They should try to use moderately-adjustable, highly-extendable styles. This will save the limited floor area and will not affect the amount of food stored.
As for audio and video equipment, TVs can be thin, lightweight, and capable of wall-mounting products to minimize the space occupied by TV cabinets. If conditions permit, consider choosing a projection device to make the design of the wall more concise. The sound equipment is installed on the wall and the top surface as much as possible, which can achieve good sound effects without complicating the surface of the tense area.

Space renderings Units renderings Space Furniture Decoration TV Decoration Glass partitions Cabinets Chests of drawers

Our Foundry for Cast Iron Stove / Wood Burning Stove located in Cangzhou city of China ,the famous " township of the casting " ,Cangzhou iron lionhad more than 1000 years history .So we have more experience of casting .


We also have steel plate stoves with classic designs .


All of the cast iron stoves with high temperature painting ,with antique design and high quality workmanship .Cast iron stoves / Wood Burning Stoves/steel stoves  are popular in European markets,USA markets, Australian markets and other markets .


013s


steel stove

Cast Iron Stove / Wood Burning Stove/Steel stove

Cast Iron Stove,Wood Burning Stove,Steel plate stove ,Small Stove

SHIJIAZHUANG AOJIN TRADE CO.,LTD , http://www.chinagroundscrew.com

Posted on