Fall protection training depends on the protective environment

Fall protection qualified personnel training

The training needs to be mastered: relevant standards and certifications for fall protection; three steps for hazard assessment; function and composition of personal fall protection systems; anchor selection and performance requirements; calculation method for headroom; fall protection cases and configurations for different industries and applications; primary altitude rescue Escape solutions; detection and maintenance of fall protection products. It is possible to establish, implement and administer anti-fall safety procedures, understand industry standards, laws and regulations, product inspections, etc. This training course combines classroom theory courses with on-site practical training and is suitable for safety management personnel, or for high-altitude personnel and high-altitude personnel who have not received similar training.

Fall Protection Intermediate Training

The training needs to be mastered: the use of a variety of fall protection equipment and clearance calculations; the installation of anchor points; the erection and inspection of rescue equipment; the analysis of multi-scenario anti-fall cases; a variety of environmental escapes and rescues; basic knotting techniques; and back-up protection systems. Mainly to further improve the application and practice of fall protection products. Understand the various environmental applications of rescue and evacuation, so that the comprehensive ability of trainees can be improved. The training not only involves the use of the products, but also requires the students to use the products in practice.

Qualified wind climbers

The training needs to be mastered: knowing the fall and how to control the falling hazards; standards and certifications; the dangers of wind power operations; the function and composition of personal fall protection systems; anchor selection and performance requirements; wind power escape; simulated rescue of wind power platforms; use of wind power PFAS; Anti-fall product inspection and maintenance. Wind turbine installation and maintenance is not an easy task. This course will provide basic protection against falling crashes and climbing skills for those working in the wind power industry, so that you will be fully protected in wind power operations.

Wind power escape and rescue

The training needs to be mastered: setting anchor points; erecting and inspecting rescue equipment; analysis of various wind power scenarios against falling; self-rescue technology; use of multiple escape rescue equipment; multiple wind power environment escapes and rescues; basic knotting technology; backup protection system Wait. Specifically developed for employees working in the wind power industry or for wind power rescue teams. The wind power industry is a highly dangerous work environment. People engaged in work at height always fall down and need to escape and rescue. The effectiveness of escape rescue; timeliness; safety; all are related to the success or failure of escape and rescue.

Confined space fall protection

Training needs to be mastered: understanding and hazards of confined spaces; standards and certification; basic configuration and composition of confined spaces; function and composition of personal fall protection systems; anchor selection and performance requirements; proper use of gas detection equipment; understanding and operation of ventilation technology How to choose and use respiratory protection equipment; planning for entering confined spaces; methods for confined space rescue. Due to the wide range of fields involved in confined space operations, many industries, complicated operating environment, many risk factors, serious consequences, and difficulties for rescue personnel in distress after rescue. This course is specially developed for employees or managers who participate in confined space entry and operation, allowing students to participate in the escape and rescue of confined spaces. At the same time, students can decrypt the closed space operation process, regulations and risk control.

Fall Protection Product Qualified Inspector

The training needs to be mastered: basic principles of product inspection; awareness of PPE; detection methods of engineering systems, relevant standards and certifications; what is the qualifications of personnel; the role of the inspector; classification of product components; pre-use inspections and periodic inspections; And record keeping etc. Practice check: Contains PPE and engineering systems. Facilitates mastering basic inspection standards for fall protection products; laws or regulations (US standards); inspection procedures; inspection terms, and documentation of inspection records. Students need to master the theoretical and practical content, and pass the exam to give a certificate. It is suitable for any employees who are interested in high-altitude anti-fall products, equipment management personnel, or fall protection qualified personnel.

This website solemnly declares: This article is the reprint of the online media, only represents the author's point of view, has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.