Cutting knowledge of carbide saw blade on push table saw Cutting knowledge of carbide saw blade on push table saw
This Fabric NFC Wristbands are with a small pvc tag size in 40X25mm (35X26mm or other size), and the fabric wristband in 300x15MM or 350X15mm with a slider.
Can print your logo or design on the tag and wristband. The UID number would be laser on the PVC tag too.
URL or numbers would be encoded by us, and matching the laser printing.
There are kinds slider in option too white, black, one time suing or long term using.
7-8 working days with your logo printing for 5k. 3-4 days delivery. Let us know if your Fabric NFC Wristbands in urgent need, we also provide priority production for urgent orders.
Fabric NFC Wristbands with NXP Ntag213 chip inside, also can replaced by Ntag215, Ntag216 or any chip you need, and are super easy to put on your wrist, look great with YOUR logo on a sliding PVC tag, and close with a white plastic clasp that has teeth to prevent the wristband from falling off.
The white plastic clasp on Fabric Wristbands made for ONE-TIME USE only. There have reusable clasp too.
Ideal for making your next event, party or festival a memorable experience!
Fabric NFC Wristbands can be embedded 125Khz chips like Tk4100, EM4200, T5577, EME44305 and Hitag etc.
Besides, SunwayRFID also provide Silicone RFID Wristbands, RFID Bracelet , PVC RFID Wristbands, RFID Keychain , RFID Tag and rfid cards too, one-shop can meet all your need about RFID.
Price, customer service, and quality always at our first place!
Idling: especially when the new substrate is used for the first time, it needs to idle for about 30 minutes. In summer, the high temperature season needs to be idling with water. The purpose is to further eliminate the influence on the substrate when welding the cutter head and enhance the inherent quality of the saw blade under high-speed rotation. Memory. 2. The block material should not be less than 0.5m3, and it should be placed securely. The bottom surface should be padded with square wood. The plug should be solid and firmly. The blockage should be located at the symmetrical position of the workbench to ensure the stability of the workbench and blocks. No shaking. Trembling. 3. Adjust the travel switch according to the length, width and height of the block material, so that the saw blade lifting and the travel of the skip are within a reliable and effective range. Before the sawing, the blade edge should be 10 to 20 mm away from the block. After sawing, the sawhole should be 20-40mm away from the bottom of the block. Before the saw blade moves left and right, the saw blade should be completely removed from the block sawing. The distance should not be less than 150-200mm to prevent the saw blade from colliding. material. 4. After the saw blade is stable and idling, the test cutting can be carried out. When the blade edge is not in contact with the block material, the saw blade is started. The saw blade is not allowed to rotate during the cutting, and the saw blade can be stopped after the saw blade is stopped. 5. If the blockage is found to be swaying during cutting, the cutting should be stopped immediately. After the block material is fixed firmly, it can continue to work. During the cutting, it is not allowed to move the block material arbitrarily. 6. When cutting, it is found that the saw blade has obvious deceleration or even the phenomenon of clamping. It may be caused by the belt slipping, the loosening of the compression nut or the too deep depth of the knife, and the speed of the knife is too fast. 7, the line speed should be compatible with the hardness and wear resistance of the processed stone, it is recommended to select the following line speed to cut different types of stone. Tip: Increase the cutting efficiency when the line speed is not high, which will reduce the life of the saw blade. 8. The feed speed depends mainly on the performance of the processed material. For each material, when the depth of cut is constant, there is a certain range of feed speed. If the speed is too high, the diamond will accelerate wear and even fall off, resulting in saw blade consumption. Too fast, if the speed is too low, it will make the saw blade self-sharp process not normal, thus "blunt, slip" to lose the cutting ability. Under normal circumstances, the feed rate should be slow when cutting in. It should be even when sawing. For common typical materials, when the depth of cut is 20mm, the following feed speed table is recommended for your reference. When the thickness changes, the cutting speed can be Converted by the cutting area (cm2/min). Tip: The first infeed or the first three walks of each plate should be halved. Common material saw blade feed speed unit: mm/mi 9, cutting depth for medium hardness stone such as marble, limestone can be cut through once, for hard stone and abrasive, such as granite, sandstone should be cut step by step, single piece Saw-cut granite, the depth of the knife is generally 10-20mm, the depth of the cutting marble is 50-100mm, and the multi-sided double-sided cutting hard granite, the depth of each knife is 3-5mm, should be based on the hardness of the stone, the saw used For the performance of the film and saw, the following efficiency tables are recommended for your reference. Common material cutting efficiency Note: “Level 1†means low power finishing; “2†level means high power roughing. 10. The direction of rotation of the saw blade is the same as that of the stone feed direction, and vice versa, while the reverse cut, due to the upward vertical component force, forms the potential of picking up the stone. Therefore, in order to stabilize the stone, under the same conditions Under the hood, try to use cis cutting. When reverse cutting is used, the cutting depth is reduced, generally to 1/3 to 1/2 of the cis-cut. 11. In summary, the basic requirements for selecting the cutting process are: for stone with low hardness and good cutting performance, it can be deep and slow, and vice versa, that is, the same stone and the corresponding sawing machine and saw blade should be The cutting efficiency is high, the quality of the cutting board is good, and the process parameters of the saw blade and the substrate have a long service life. The four complement each other, and the lips and teeth are dependent, and the whole can not be partial. For example, when the cutting speed of the saw blade cannot be maintained, it indicates that the saw blade is blunt, and the cutting depth should be reduced to increase the cutting speed to sharpen the saw blade.
Source of information: http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Fabric NFC Wristbands can be embedded 13.56MHZ chips like Ntag213, NTAG215, NTAG216, Mifare Classic, Desfire EV2/EV2, Plus X, Plus SE, ICODE, Ultralight, TI 2084, Topaz512, and F08 etc.
Fabric NFC Wristbands can be embedded 860MHZ-960MHZ chips like Alien H3, Alien H4, U-Code Gen2 and Impinj M4/M5 etc.
Special project? Custom Fabric NFC Wristbands? If you need more than 500 wristbands, you'll receive an instant discount!
Fabric NFC Wristbands
Fabric NFC Wristbands,Disposable RFID Fabric Wristband,Elastic Custom Fabric NFC Wristband,Custom Woven Bracelets
Sunway Smartech Co.,LTD , https://www.sunwayrfid.com