DIN11850 Stainless Steel Sanitary Pipes is the main tubing line for a piping system. Generally, DIN11850 Stainless Steel Sanitary Pipes are made in stainless steel 304 and 316L, but we provide other grade too such as hastelloy C22, 316Ti, Titanium and nickel alloy etc. Kaysen offer both Sanitary Seamless Tubes and Sanitary Welded Tubes to ASTM A270, ASTM A249, A269, ASTM A554, DIN11850, and size is up to 12″. Inner and outer surface is polished to meet the high purity requirement of hygienic industries. Kaysen is ability to supplying qualified DIN11850 Stainless Steel Sanitary Pipes comply to your your condition and FDA,GMP requirement. DIN11850 Stainless Steel Pipes,DIN Sanitary Tubes,1.4306 Hygienic Pipes Kaysen Steel Industry Co., Ltd. , https://www.chinasanitaryvalve.com category Illegal situation First check Overdue Organization and responsibilities The principal person in charge did not perform the duties of safety production management. Order to correct within a time limit A fine of 20,000 yuan to 50,000 yuan for the principal responsible person shall be ordered to suspend production and suspend business for rectification. The safety production management personnel fail to perform the safety production management duties stipulated in this Law. Order to correct within a time limit Failure to set up a safety production management organization or equipped with safety production management personnel Ordered to correct within a time limit, can be fined less than 50,000 yuan Ordered to suspend production and suspend business for rectification, and impose a fine of not less than 50,000 yuan but not more than 100,000 yuan, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 10,000 yuan but not more than 20,000 yuan. Safety
produce
Input The decision-making body, the principal person in charge, or the individual-invested investor does not comply with the provisions of this Law to ensure the capital investment necessary for safe production, resulting in the production and business units not having safe production conditions. Order to correct within a time limit and provide necessary funds Ordered production and business units to suspend production and suspend business for rectification system
Procedure Production, operation, transportation, storage, use of dangerous goods or disposal of discarded dangerous goods, no special safety management system, no reliable safety measures Ordered to correct within a time limit, can be fined less than 100,000 yuan Ordered to suspend production and suspend business for rectification, and impose a fine of not less than 100,000 yuan but not more than 200,000 yuan, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 20,000 yuan but not more than 50,000 yuan. No accident hidden danger investigation and management system has been established Ordered to correct within a time limit, can be fined less than 100,000 yuan Ordered to suspend production and suspend business for rectification, and impose a fine of not less than 100,000 yuan but not more than 200,000 yuan, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 20,000 yuan but not more than 50,000 yuan. Enter into an agreement with the practitioner to waive or mitigate its legal responsibility for the injury or death of the employee due to production safety accidents. The agreement is invalid; the principal responsible person of the production and business unit and the individual operating investor shall be fined not less than 20,000 yuan but not more than 100,000 yuan. education
Training The production, operation and storage units of dangerous goods, as well as the main responsible persons of mines, metal smelting, construction and road transport units, and safety production management personnel have not passed the examination. Ordered to correct within a time limit, can be fined less than 50,000 yuan Ordered to suspend production and suspend business for rectification, and impose a fine of not less than 50,000 yuan but not more than 100,000 yuan, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 10,000 yuan but not more than 20,000 yuan. education
Training Failure to comply with the regulations on safety production education and training for employees, dispatched workers, and intern students, or failing to truthfully inform relevant safety production matters in accordance with regulations; Ordered to correct within a time limit, can be fined less than 50,000 yuan Ordered to suspend production and suspend business for rectification, and impose a fine of not less than 50,000 yuan but not more than 100,000 yuan, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 10,000 yuan but not more than 20,000 yuan. Failure to document safety production education and training Special operations personnel have not been trained in special safety operations in accordance with regulations and have obtained corresponding qualifications. produce
equipment
facility Failure to comply with regulations for safety evaluation of mines, metal smelting construction projects or construction projects for the production, storage, loading and unloading of dangerous goods Order to stop construction or suspend production and suspend business for rectification, correct within a time limit A fine of not less than 500,000 yuan but not more than 1 million yuan shall be imposed, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 20,000 yuan but not more than 50,000 yuan. Mines, metal smelting construction projects or construction projects for the production, storage, loading and unloading of dangerous goods have no safety facilities design or safety facilities design has not been reported to the relevant departments for review and approval according to regulations. The construction unit of the mine, metal smelting construction project or construction project for producing, storing, loading and unloading dangerous goods is not designed and constructed in accordance with the approved safety facilities. Mines, metal smelting construction projects or construction projects for the production and storage of dangerous goods are completed and put into production or use, safety facilities have not been tested and accepted. No obvious safety warning signs have been set up in production and operation places and related facilities and equipment with major risk factors. Ordered to correct within a time limit, can be fined less than 50,000 yuan A fine of not less than 50,000 yuan but not more than 200,000 yuan shall be imposed on the directly responsible person and other directly responsible personnel for a fine of not less than 10,000 yuan but not more than 20,000 yuan; if the circumstances are serious, the production shall be suspended and the business shall be suspended. Installation, use, testing, modification and scrapping of safety equipment do not comply with national standards or industry standards No regular maintenance, maintenance and periodic inspection of safety equipment produce
equipment
facility Labor protection products that meet the national or industrial standards are not provided to practitioners. Ordered to correct within a time limit, can be fined less than 50,000 yuan A fine of not less than 50,000 yuan but not more than 200,000 yuan shall be imposed on the directly responsible person and other directly responsible personnel for a fine of not less than 10,000 yuan but not more than 20,000 yuan; if the circumstances are serious, the production shall be suspended and the business shall be suspended. Containers and means of transport for dangerous goods, as well as special equipment for offshore oil exploration and special underground equipment for personal safety and danger, have not been tested and qualified by professionally qualified institutions, and have obtained safety certificates or safety signs and put them into use. of Use processes and equipment that should be eliminated and endanger production safety Workshops, shops, warehouses for the production, operation, storage and use of dangerous goods are in the same building as the staff quarters, or the distance from the staff quarters does not meet the safety requirements. Order to correct within a time limit Ordered to suspend production and suspend business for rectification, and may impose a fine of less than 50,000 yuan. The person directly responsible for it and other directly responsible personnel may be fined up to 10,000 yuan. Production and business premises and staff quarters are not provided with exits that meet the needs of emergency evacuation, marked signs, and remain unblocked, or locks or blocks production and business premises or employee dormitory exits. operation
Safety Blasting, hoisting, and other dangerous operations as stipulated by the safety production supervision and administration department of the State Council in conjunction with the relevant departments of the State Council, no special personnel were assigned to conduct on-site safety management. Ordered to correct within a time limit, can be fined less than 100,000 yuan Ordered to suspend production and suspend business for rectification, and impose a fine of not less than 100,000 yuan but not more than 200,000 yuan, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 20,000 yuan but not more than 50,000 yuan. Contracting or leasing production and operation projects, places and equipment to units or individuals that do not have safe production conditions or corresponding qualifications Ordered to correct within a time limit, confiscation of illegal income; illegal income of more than 100,000 yuan, and the illegal income of more than two times more than five times the fine; no illegal income or illegal income less than 100,000 yuan, single or more than 100,000 yuan A fine of not more than 200,000 yuan; a fine of not less than 10,000 yuan but not more than 20,000 yuan for the person directly in charge and other directly responsible personnel; if the production safety accident causes damage to others, the contractor and the lessee shall bear Joint liability Failure to sign a special safety production management agreement with the contractor or the chartering unit, or fail to clarify their respective safety production management responsibilities in the contract or lease contract, or fail to coordinate and manage the safety production of the contractor and the renter. Responsible for correction within a time limit, can be fined less than 50,000 yuan, the person directly responsible for it and other directly responsible personnel can be fined less than 10,000 yuan Ordered to suspend production and suspend business for rectification operation
Safety Two or more production and operation units carry out production and operation activities that may endanger the safety production of the other party in the same operation area, fail to sign a safety production management agreement or fail to designate full-time safety production management personnel for safety inspection and coordination. Responsible for correction within a time limit, can be fined less than 50,000 yuan, the person directly responsible for it and other directly responsible personnel can be fined less than 10,000 yuan Ordered to suspend production Hidden danger
Troubleshoot
Governance The accident investigation and management situation was not recorded or reported to the practitioners. Ordered to correct within a time limit, can be fined less than 50,000 yuan Ordered to suspend production and suspend business for rectification, and impose a fine of not less than 50,000 yuan but not more than 100,000 yuan, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 10,000 yuan but not more than 20,000 yuan. No measures have been taken to eliminate accidents Order to eliminate immediately or to eliminate within a time limit The production and business unit refuses to implement (immediately eliminate or limit the elimination of hidden dangers) Ordered to suspend production and suspend business for rectification, and impose a fine of not less than 100,000 yuan but not more than 500,000 yuan, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 20,000 yuan but not more than 50,000 yuan. Rejecting or obstructing departments responsible for safety production supervision and management to carry out supervision and inspection according to law If it refuses to make corrections, it shall be imposed a fine of not less than 20,000 yuan but not more than 200,000 yuan; the person directly responsible for it and other directly responsible personnel shall be fined not less than 10,000 yuan but not more than 20,000 yuan. major
Danger
Source tube
Rational The major hazard source has not been registered and filed, or has not been evaluated, monitored, or has not prepared an emergency plan. Ordered to correct within a time limit, can be fined less than 100,000 yuan Ordered to suspend production and suspend business for rectification, and impose a fine of not less than 100,000 yuan but not more than 200,000 yuan, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 20,000 yuan but not more than 50,000 yuan. Emergency
Rescue Failure to formulate emergency rescue plans for production safety accidents or organize regular drills in accordance with regulations Ordered to correct within a time limit, can be fined less than 50,000 yuan Ordered to suspend production and suspend business for rectification, and impose a fine of not less than 50,000 yuan but not more than 100,000 yuan, and the person directly responsible for it and other directly responsible personnel shall be fined not less than 10,000 yuan but not more than 20,000 yuan. ACCIDENT
management When the main responsible person has a production safety accident in his unit, he will not immediately organize the rescue or leave the job or escape during the accident investigation and handling. The punishment for demotion and dismissal shall be imposed, and the safety production supervision and administration department shall impose a fine of 60% to 100% of the annual income of the year; the detention shall be detained for 15 days or less; if it constitutes a crime, according to the criminal law The relevant provisions are investigated for criminal responsibility.
If the principal responsible person of a production and business operation conceals, falsely reports or delays reporting on a production safety accident, he shall be punished in accordance with the provisions of the preceding paragraph.
DIN11850 Stainless Steel Sanitary Pipes - Polished Stainless Steel Tube – Stainless Steel Hygienic Tubes
Material: SS304, SS316L, EN 1.4301, EN 1.4404, etc
OD diameter: 1/2" - 12"
Thickness: 0.5mm - 6mm
Standard: ASTM, JIS, DIN, JIS, SUS, GB
Length: 6m or customer made
Tolerance: OD. ±0.2mm; Thickness: ±0.02mm; Length: ±0.5mm
Surface Treatment: Matt Finish or Mirror Finish (320# 400# 600#) etc
Application: Boiler, heat exchanger, construction, hygienic, pharmacy, power, petrochemical
Strength:
Heat Treatment of solution annealing for the sanitary tubings and fittings are available
High precision on dimension and wall thickness
Both seamless and welded sanitary tubings are available
Length is up to 12 meters.
Min. order quantity of sanitary tubings is from 300Kgs.
Offer industrial pipe and tubes according to order.
PMI test to verify material grade.
Visual and surface 100% examination before shipment.
End protected for shipment.