In the life, the humidity of the air has a certain relation to our health, and the proper humidity in industrial production is more important, so in some relatively dry places, the use of industrial humidifiers is very important, we not only want to use Industrial humidifier, in the event of his failure, we also need to know how to deal with, the following grid run to introduce some of this knowledge for everyone.

Industrial humidifier converts electrical energy into mechanical energy through a transducer to overcome the cohesion of water molecules, atomize water into micron-sized ultrafine particles, and then atomize the water through a pneumatic device and diffuse it into the indoor space to achieve humidification. purpose. The humidifier will not appear fog during use. The reasons for no fog are two reasons:

The reason why the industrial humidifier does not fog out is that the humidifier does not have regular cleaning and maintenance, and a large amount of scale is attached to the atomizing sheet that is immersed in water for a long time. Therefore, the atomizer cannot operate normally, resulting in less fog or no fog. fog.

Maintenance method: Clean the atomizer regularly or replace the atomizer.

Maintenance method: Use pure water, switch off and change the water every day, and thoroughly clean it once a week. If you use a humidifier with ordinary tap water, you need to clean it regularly, and use a special detergent to clean the sink, atomizer, and water tank.

The humidifier does not cause fog. 2. Check whether the fan is working properly when the humidifier is turned on. If there is any wind, if the fan is not running, check the electrical components, whether the power is normal, and whether the fan is damaged.

Maintenance method: Replace the power supply or fan.

Everyone should pay attention to the control of humidity while using the humidifier. Through experiments, people feel the most suitable and most conducive to health when the humidity is 40%RH-60%RH. Therefore, it is best to use a humidifier with automatic humidity control function. Only when the indoor humidity is lower than the standard range, the machine will start humidification. Above this range, it will reduce the amount of fog to stop humidification. If you use a humidifier without automatic humidity control, it is best to put a hygrometer in the room to know the humidity of the air at any time, and adjust the humidifier's working condition according to the humidity.

Diamond Grinding Brush

CHANGZHOU ANTALYA TOOL AND MACHINERY CO., LTD. , https://www.atly-tool.com

Posted on