1. Start with proper leveling. Before applying waterproofing, it's essential to level the floor using cement mortar, especially in renovated homes where the surface might be uneven. This step ensures that the waterproof coating is applied evenly and prevents damage from cracks or thin spots that could lead to leaks. 2. Pay close attention to critical areas. The junction between the wall and the floor, as well as the connections around water pipes, are common problem spots. These areas require careful treatment to ensure a tight seal. Avoid rushing through these steps—every detail matters for long-term protection. 3. Don’t forget the walls. In most bathrooms, it’s recommended to apply waterproofing to the walls up to about 30 cm above the floor to prevent moisture from seeping through. For areas near the bathtub, waterproof the wall higher than the tub’s rim, and for showers, the waterproof layer should extend to at least 180 cm to provide full coverage against water exposure. 4. Conduct a thorough waterproof test. Once the waterproofing is complete, block all drains and fill the bathroom with water. Leave it for 24 hours and then check the walls and floor for any signs of leakage. If no water seeps through, your waterproofing job was successful. If there are issues, locate the weak points and make necessary repairs before proceeding. By following these steps carefully, you can significantly reduce the risk of water damage in your bathroom. Proper preparation, attention to detail, and testing are key to ensuring a durable and effective waterproofing system. Always take the time to do the job right—it will save you from costly repairs down the line. 150mm Wall Chaser Groove Cutting Machine
The 1700W 150mm Wall chasers are a twin bladed power tool which used to cut groove on brick, stone or concrete walls, perfect for electricians and plumbers, to lay wires or water pipes in the wall.
The 1700W 150mm Wall Groove Cutting Machine Chaser with Cutting Depth 10-40mm, cutting Width 14/19/29mm.
The Concrete Wall Cutting Machines With Spindle lock for easy blade change.
BTW, The Groove Wall Chaser Machine with Laser Function for cutting line straight.
The Wall Chaser work efficiency is much higher than the 5 blades wall chaser, and Less Dust with dust blower.
The 150mm Wall Cutting Machine is comfortable to use, due to anti-slip handle with soft grip cover.
150Mm Wall Chaser Groove Cutting Mchine,Best Electric Wall Chaser ,Brick Wall Chaser,Wall Cutting Machine Ningbo Brace Power Tools Co., Ltd , https://www.cnbrace.com