Which channel gates are suitable for deployment in theater entrances? Wing gates, wing gates, or three-roll gates? It is recommended that the ticketing system be equipped with a ticketing system to reduce personnel expenses while managing the order of entry and exit on the site. Among them, three-roll gates, wing gates and swing gates are the first-to-be considered channel gates in cinemas.

Theatre channel gate selection: swing gates, wing gates, three roller gates have their own advantages and disadvantages.

Three roller gate + ticketing system. The gates commonly considered in subways, light rails, and tourist attractions are superior to other access gates in terms of performance, safety, practicality, maintenance, etc., and are cheaper, and open spaces can also be used.

Swing gate + ticketing system. The appearance is better than the three-roll gate, and the speed of passing is high and the safety is high. However, the phenomenon of tailing tends to occur. It is recommended that special personnel be supervised in places such as theaters to prevent tailgating. At the same time, the cost is high, and it is necessary to configure an umbrella for outdoor use.

Wing gate + ticketing system. No matter if it is appearance or traffic efficiency, it is very good. Safety is relatively low compared to the trip roller gate, and it is prone to pinching tourists and trailing phenomenon. It is also advisable to use special personnel supervision for the unit's configuration. The protection of umbrellas is also required for use in open spaces.

Due to the small entrance space of the theater, wireless hand-held ticket gates are recommended when installing access gates. The exit passages require spaciousness to ensure that the evacuation work in an emergency situation is in place. Therefore, the exit does not recommend installation of any gate equipment.

Channel gate system management center's three major management: system management, financial management, customer management.

System Management. Mainly responsible for user management, ticket management, equipment management and other functions, the best management by the leadership.

Financial Management. Mainly responsible for financial settlement and statistics, used by financial personnel;

Customer management. Orders and settlements of major negative group units are used by the marketing department.

Combining these three functional modules and using three different management software and three different departments, three different terminals need to be configured. For small theaters, three sets of software can be installed on one terminal at the same time. In combination with swing gates, wing gates and three-roll gates, it can better maintain the order at the site, maintain the reputation of the users, and create a good service environment.

Industrial Grade Salt

Sea Salt has hundreds of industrial applications. It is very widely used in chemical industries, for example, the Chlor-Alkali industry, which uses chiefly salt to manufacture chlorine and caustic soda. Chlorine and caustic soda are used further in the manufacture of paper. It is also used as a water softener. Soft water can more economically use soap and detergent, and is therefore ideal for cleansing purposes. Rubber manufacturers use salt to separate rubber from latex. It is used in the metal industry to remove impurities from metal. We produce A and B Grade Sea Salts for such industrial uses.

Another major use of salt is de-icing, removing ice from a surface. Although rock salt is the more common type of salt for this purpose, sea salt is also perfectly suited to perform the task. This works by spreading diluted salt over the frozen surface. Since salt water has a lower freezing point than pure water, ice melts away as soon as it absorbs salt. We produce a C Grade Sea Salt for de-icing purposes.

Industrial Sea Salt

Industrial Sea Salt,High Level Industrial Salt,Water Softener Salt,A Grade Industrial Salt

Weifang Xinchang Chemical Co.,Ltd , http://www.xinchangchem.com

Posted on