Nowadays, many people like to buy solid wood furniture, which can improve the style of the whole home decoration at home. However, there are many solid wood furniture on the market, and it is true and false. If it does not distinguish the quality of solid wood furniture, it may be deceived by unscrupulous merchants. Below Titan Madi will take a look at the method of identifying the quality of solid wood furniture shared by Daren, and be prepared to buy it again. If the whole surface you see is a whole grain, then you can calculate that the 2 meter wide cabinet is divided into three door leaves each at least 50cm~60cm wide. The tree is at least 80cm~100cm in diameter, then you This cabinet is much more expensive. Try not to buy a particularly thick surface treatment, buy solid wood furniture is an environmentally friendly, woody sense of warmth, Japanese furniture is simple to use 1-2 times vegetable oil treatment is more common. Many furniture surfaces are sprayed on the left and next layers, and the oil shines brightly. It is the same as the car's film polishing, and some of them can't see the original color of the wood. However, this part is a personal hobby. Some wood species do have such effects after processing, but they are not particularly excessive. Source: GO Jiaju Furniture Network Coated OEM Hookah Aluminum Foil,High Quality Shisha Hookah Aluminum Foil,Soft High Quality Shisha Hookah Henan Everwin Trade Co., Ltd. , https://www.ewaluminium.com
How to buy solid wood furniture is optimistic about quality is the key 1, look: through the wood grain to identify the quality of solid wood furniture.
For example, a large wardrobe, more than 2 meters wide, if the entire panel is wood grain, then you can see if each wood grain is the same, pay attention to even the wood grain cut on the same tree will There are subtle differences. Because the tree is round and cut into pieces, the width of the section of the annual ring is not the same.
2, listening: use the index finger to get the joint gently knocked, pay attention to the sound.
For example, 30mm thick boards, some will use the middle pine tree as the frame, and the front and back composite boards are attached. The composite board here is a few layers of veneer pressed, which is the real wood grain. You can feel the noise when you knock. Because this method is divided into three parts:
How to buy solid wood furniture is the key to quality. 1. It is the sound guide of the composite board itself. It is expanded on the plane of the board.
2. Part of it passes through the composite plate to the hollow part and spreads in the hollow space.
3, the sound of the hollow space spread to the opposite board to return, as well as the echo and noise of the frame.
Then you knock on the pillars, beams, legs, and these parts, because if the merchant says that this is solid wood furniture, these parts are generally not fake, because it is too easy to see. Of course, the merchants will say that the thickness will be different. The sound will be different. Of course, if you are all solid wood, you can hear the difference between thick and thin, because the sound is transmitted in the same medium.
How to buy solid wood furniture is the key to quality 3, the edge of furniture identification method: by looking at the quality and design of other furniture to identify the quality of solid wood furniture.
The above two are relatively stupid practices, manufacturers do not lie, this is a business lie.
It is common to use cheap wood in the middle and veneer on the outside. For example, ash, with pine or fir in the middle, the veneer of ash will be attached to the front and back, and some are simply replaced by large core plates, and then the borders are sealed. For example, the door of the wardrobe has a frame, which is really difficult to distinguish. It's not really a big knock, so you look at other furniture, look for the board without a frame. Mainly look at two aspects:
First, look at the wood grain. The cross section of the board without the edge is not the same as the wood grain on the front side, but there is an intrinsic connection. If the wood grain is directly connected to the side from the front of the board, it is skinned. Second, look at the design, because the same style, the practice of solid wood is not the same as the practice of fake solid wood. The real wood will be much simpler and clearer. The fake solid wood will always be covered by some extra edges and grooves. The place on the side.
How to buy solid wood furniture is optimistic about quality is the key 4, Titan Madi recommended.