Netcom: In order to implement the "Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Wastes", strictly restrict the import of solid waste, and control the production of scrap steel, waste non-ferrous metals, waste motor, waste wire and cable, scrap metal, etc. Environmental pollution, regulating the import license for solid waste imports as raw materials, the Ministry of Environmental Protection decided to amend the Environmental Protection Control Standard for Imported Solid Wastes as Raw Materials. And printed to all relevant departments for written comments. The specific amendments are as follows: Imported solid waste environmental protection control standard waste that can be used as raw materials Foreword In order to implement the Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Wastes, strictly restrict the import of solid waste, control the environmental pollution caused by the waste that can be used as raw materials, and regulate the import license for solid waste that can be used as raw materials. This standard specifies the environmental protection control requirements for imported waste. This standard is one of the series of environmental protection control standards for imported solid waste. It is applicable to the import management of waste in the catalogue of imported solid wastes that can be used as raw materials. This standard was first published in 1996 and first revised in 2005. This is the second revision. The main contents of this revision: Increased the requirement for the external radiation penetration value of imported waste; Adjusted hazardous waste control requirements; The control requirements for general inclusions are tightened. From the date of implementation of this standard, the “Environmental Control Standard for Solid Wastes Imported as Raw Materials†(gb16487.62005) shall be abolished. This standard is revised by the Department of Soil Environmental Management of the Ministry of Environmental Protection and the Department of Science and Technology Standards. This standard is mainly drafted by: China Academy of Environmental Sciences. This standard The Ministry of Environmental Protection approved 20 □ □ □ □ □ □ □ □ □ This standard is implemented from 20 □ □ □ □ □ □ □ □ □. This standard is explained by the Ministry of Environmental Protection. 1 Scope of application This standard specifies the environmental protection control requirements for imported waste. This standard applies to the waste import management of the following customs commodity numbers: 2 normative references This standard refers to the terms of the following documents. For undated references, the valid version applies to this standard. Gb5085.1 hazardous waste identification standard corrosion Gb5085.2 hazardous waste identification standard acute toxicity primary screening Gb5085.3 hazardous waste identification standard leaching toxicity Gb5085.4 Hazardous waste identification standard flammability Gb5085.5 hazardous waste identification standard reactivity Gb5085.6 Identification of hazardous wastes Sn/t0570 imported waste radioactive contamination inspection procedures for use as raw materials Sn/t1791.4 Imported waste inspection and quarantine procedures for use as raw materials Part 4: Waste National Directory of Hazardous Wastes (Ministry of Environmental Protection, National Development and Reform Commission, Ministry of Public Security Order No. 39) 3 terms and definitions The following terms and definitions apply to this standard. 3.1 Inclusions Carried-waste is mixed with other substances in the imported waste during the process of production, collection, packaging and transportation (excluding imported waste packaging and other substances that need to be used in transportation). 4 control standards and requirements 4.1 The control of radioactive pollution of imported waste shall meet the following requirements: a) Prohibit the mixing of radioactive waste; b) The external radiation penetration value of waste (including packaging) does not exceed the normal natural radiation background value of the location of the import port +0.25gy/h; c) the surface level of the waste, the level of radioactive contamination is: the average value of the maximum detection level of 300 cm 2 of any part of the surface does not exceed 0.04 bq / cm 2, not more than 0.4 bq / cm 2; d) The specific activity of the radionuclide in waste should be lower than the limit of Table 1. 4.2 It is forbidden to mix explosive weapons and ammunition such as abandoned zha dan and shells. 4.3 In the waste, the following inclusions should be strictly limited, and the total weight should not exceed 0.01% of the imported waste weight. a) a closed container; b) Identification according to the identification criteria of gb5085.1~gb5085.6, any hazardous waste with one or more dangerous characteristics such as corrosive, toxic, flammable, and reactive; c) Other wastes in the National Hazardous Waste List. 4.4 In addition to the wastes listed in the above, waste should limit other inclusions (including wood waste, The mixed waste of waste paper, waste glass, waste plastics, waste rubber, powder, and stripped rust shall not exceed 0.3% of the imported waste weight. 5 test 5.1 The inspection of Article 4.1 of this standard shall be carried out in accordance with the provisions of sn/t0570. 5.2 Articles 4.3b) and 4.3c) of this standard shall be inspected according to the method specified in gb5085.1~gb5085.6. 5.3 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of sn/t1791.4. Imported solid waste environmental protection control standard for use as raw materials Foreword In order to implement the Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Wastes, strictly restrict the import of solid waste, control the environmental pollution caused by the import of waste non-ferrous metals that can be used as raw materials, and regulate the import license for solid waste imports as raw materials. standard. This standard specifies the environmental protection control requirements for imported waste non-ferrous metals. This standard is one of the series of environmental protection control standards for imported solid waste. It is applicable to the import management of waste non-ferrous metals in the catalogue of imported solid wastes that can be used as raw materials. This standard was first published in 1996 and first revised in 2005. This is the second revision. The main contents of this revision: Increased requirements for external radiation penetration of imported non-ferrous metals; Increased control requirements for powder in waste non-ferrous metals; Adjusted hazardous waste control requirements; The control requirements for general inclusions are tightened. From the date of implementation of this standard, the “Environmental Control Standard for the Environmental Protection of Solid Wastes Imported as Raw Materials†(gb16487.72005) shall be abolished. This standard is revised by the Department of Soil Environmental Management of the Ministry of Environmental Protection and the Department of Science and Technology Standards. This standard is mainly drafted by: China Academy of Environmental Sciences. This standard is approved by the Ministry of Environmental Protection on 20 □ □ □ □ □ □ □ □ This standard is implemented from 20 □ □ □ □ □ □ □ □ □. This standard is explained by the Ministry of Environmental Protection. Imported solid waste environmental protection control standard for use as raw materials 1 Scope of application This standard specifies the environmental protection control requirements for imported waste non-ferrous metals. This standard applies to the import management of waste non-ferrous metals in the following customs commodity numbers: 2 normative references This standard refers to the terms of the following documents. For undated references, the valid version applies to this standard. Gb5085.1 hazardous waste identification standard corrosion Gb5085.2 hazardous waste identification standard acute toxicity primary screening Gb5085.3 hazardous waste identification standard leaching toxicity Gb5085.4 Hazardous waste identification standard flammability Gb5085.5 hazardous waste identification standard reactivity Gb5085.6 Identification of hazardous wastes Sn/t0570 imported waste radioactive contamination inspection procedures for use as raw materials Sn/t1791.9 Imported waste inspection and quarantine procedures for use as raw materials - Part 9: Waste non-ferrous metals National Directory of Hazardous Wastes (Ministry of Environmental Protection, National Development and Reform Commission, Ministry of Public Security Order No. 39) 3 terms and definitions The following terms and definitions apply to this standard. 3.1 Inclusions Carried-waste is mixed with other substances in imported waste non-ferrous metals during production, collection, packaging and transportation (excluding packaging for imported solid waste and other substances to be used during transportation). 4 control standards and requirements 4.1 The radioactive pollution control of imported waste non-ferrous metals shall meet the following requirements: a) prohibiting the mixing of radioactive waste; b) the external radiant penetration value of the waste non-ferrous metal (including the package) does not exceed the normal natural radiation background value of the location of the import port + 0.25 gy / h; c) the surface of the non-ferrous metal, the level of radioactive contamination is: the average of the maximum detection level of 300cm2 of any part of the surface does not exceed 0.04bq/cm2, not exceeding 0.4bq/cm2; d) The specific activity of non-natural radionuclides in waste non-ferrous metals should be lower than the limits in Table 1. 4.2 Explosive weapons and ammunition such as abandoned zha dan and shells are prohibited from being mixed with non-ferrous metals. 4.3 In the waste non-ferrous metals, the following inclusions should be strictly limited, and the total weight should not exceed 0.01% of the weight of imported non-ferrous metals. a) a closed container; b) Identification according to the identification criteria of gb5085.1~gb5085.6, any hazardous waste with one or more dangerous characteristics such as corrosive, toxic, flammable, and reactive; c) Other wastes in the National Hazardous Waste List. 4.4 The total weight of powders (smelting slag, dust, ash, dust, sludge, crystal salt, stripped metal oxides, fiber ends, etc.) with no more than 2 mm in the inclusion and contamination of waste non-ferrous metals shall not exceed the total weight of imports. 0.1% by weight of waste non-ferrous metals. 4.5 In addition to the wastes listed in the above-mentioned articles, the inclusion of other inclusions (including wood waste, waste paper, waste plastics, waste rubber, waste glass, etc.) shall be restricted in the waste non-ferrous metals, and the total weight shall not exceed the imported waste non-ferrous metals. 0.3% of the total weight. 5 Inspection 5.1 The inspection of Article 4.1 of this standard shall be carried out in accordance with the provisions of sn/0570. 5.2 Articles 4.3b) and 4.3c) of this standard shall be inspected according to the method specified in gb5085.1~gb5085.6. 5.3 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of sn/t1791.9. Imported solid waste environmental protection control standard waste motor Foreword In order to implement the Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Wastes, strictly restrict the import of solid waste, control the environmental pollution caused by the import of waste electrical machinery that can be used as raw materials, and regulate the import license for solid waste imports that can be used as raw materials. . This standard specifies the environmental protection control requirements for imported waste motors. This standard is one of the series of environmental protection control standards for imported solid waste. It is applicable to the import management of waste electrical machinery in the catalogue of imported solid wastes that can be used as raw materials. This standard was first published in 1996 and first revised in 2005. This is the second revision. The main content of this revision: the requirement for the external radiation penetration value of imported waste motors is increased; Adjusted hazardous waste control requirements; The control requirements for general inclusions are tightened. From the date of implementation of this standard, “Imported Waste Motors for Environmental Protection Control of Imported Solid Wastes as Raw Materials†(gb16487.82005) shall be abolished. This standard is revised by the Department of Soil Environmental Management of the Ministry of Environmental Protection and the Department of Science and Technology Standards. This standard is mainly drafted by: China Academy of Environmental Sciences. This standard ring The Ministry of Environmental Protection 20 □ □ □ □ □ □ □ □ □ day approval. This standard is implemented from 20 □ □ □ □ □ □ □ □ □. This standard is explained by the Ministry of Environmental Protection. Imported solid waste environmental protection control standard waste motor 1 Scope of application This standard specifies the environmental protection control requirements for imported waste motors. This standard applies to the import management of waste motor mainly based on recycled copper with the customs commodity number 7404000010. 2 normative references This standard refers to the terms of the following documents. For undated references, the valid version applies to this standard. Gb5085.1 hazardous waste identification standard corrosion Gb5085.2 hazardous waste identification standard acute toxicity primary screening Gb5085.3 hazardous waste identification standard leaching toxicity Gb5085.4 Hazardous waste identification standard flammability Gb5085.5 hazardous waste identification standard reactivity Gb5085.6 Identification of hazardous wastes Sn/t0570 imported waste radioactive contamination inspection procedures for use as raw materials Sn/t1791.8 Imported waste inspection and quarantine procedures for use as raw materials Part 8: Waste Electrical Machinery "National Hazardous Waste List" (Ministry of Environmental Protection, National Development and Reform Commission, Ministry of Public Security Order No. 39) 3 terms and definitions The following terms and definitions apply to this standard. 3.1 Inclusions Carried-waste is mixed with other substances in the imported waste motor during the process of production, collection, packaging and transportation (excluding the packaging of imported waste motor and other substances to be used during transportation). 4 control standards and requirements 4.1 The radioactive pollution control of imported waste motors shall meet the following requirements: a) radioactive waste; b) The external radiation penetration value of the waste motor (including the package) does not exceed the normal natural radiation background value of the location of the import port + 0.25 gy / h; c) The surface of the waste motor and the level of radioactive contamination are: the average value of the maximum detection level of 300 cm 2 on any part of the surface does not exceed 0.04 bq/cm 2 and does not exceed 0.4 bq/cm 2 ; d) The specific activity of radionuclide in the waste motor should be lower than the limit of Table 1. 4.3 The following inclusions should be strictly limited in the waste motor, and the total weight should not exceed 0.01% of the weight of the imported waste motor. a) peelable oil in the waste motor; b) a closed container; c) Identification according to the identification criteria of gb5085.1~gb5085.6, any hazardous waste with one or more dangerous characteristics such as corrosive, toxic, flammable, and reactive d) Other wastes in the National Hazardous Waste List. 4.4 In addition to the wastes listed in the above, the waste motor shall be restricted from the inclusion of other inclusions (including waste wood, waste paper, waste fiber, waste glass, stripped rust, waste plastic, waste rubber, etc.), and the total weight is not It should exceed 0.3% of the weight of the imported waste motor. 5 test 5.1 The inspection of Article 4.1 of this standard shall be carried out in accordance with the provisions of sn/t0570. 5.2 Article 4.3c) and 4.3d) of this standard shall be inspected according to the method specified in gb5085.1~gb5085.6. 5.3 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of sn/t1791.8. Imported solid waste environmental protection control standard waste wire and cable Foreword In order to implement the Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Wastes, strictly restrict the import of solid waste, control the environmental pollution caused by the import of waste wires and cables that can be used as raw materials, and regulate the import license for solid waste imports as raw materials. This standard. This standard specifies the environmental protection control requirements for imported waste wire and cable. This standard is one of the series of environmental protection control standards for imported solid waste. It is applicable to the import management of waste wires and cables in the catalogue of imported solid wastes that can be used as raw materials. This standard was first published in 1996 and first revised in 2005. This is the second revision. The main contents of this revision: Increased requirements for external radiation penetration of imported waste wire and cable; Adjusted hazardous waste control requirements; The control requirements for general inclusions are tightened. From the date of implementation of this standard, "Imported waste electric wires and cables for environmental protection control of solid wastes that can be used as raw materials" (gb16487.92005) shall be abolished. This standard is revised by the Department of Soil Environmental Management of the Ministry of Environmental Protection and the Department of Science and Technology Standards. This standard is mainly drafted by: China Academy of Environmental Sciences. This standard is approved by the Ministry of Environmental Protection on 20 □ □ □ □ □ □ □ □ This standard is implemented from 20 □ □ □ □ □ □ □ □ □. The standard is explained by the Ministry of Environmental Protection. Imported solid waste environmental protection control standard waste wire and cable 1 Scope of application This standard specifies the environmental protection control requirements for imported waste wires and cables. This standard applies to the import management of waste wires and cables of the following customs commodity numbers: 2 normative references This standard refers to the terms of the following documents. For undated references, the valid version applies to this standard. Gb5085.1 hazardous waste identification standard corrosion Gb5085.2 hazardous waste identification standard acute toxicity primary screening Gb5085.3 hazardous waste identification standard leaching toxicity Gb5085.4 Hazardous waste identification standard flammability Gb5085.5 hazardous waste identification standard reactivity Gb5085.6 Identification of hazardous wastes Sn/t0570 imported waste radioactive contamination inspection procedures for use as raw materials Sn/t1791.7 imported waste inspection and quarantine procedures for use as raw materials - Part 7: Waste wire and cable National Directory of Hazardous Wastes (Ministry of Environmental Protection, National Development and Reform Commission, Ministry of Public Security Order No. 39) 3 Terms and Definitions The following terms and definitions apply to this standard. 3.1 Inclusions Carried-waste is mixed with imported waste wires and other materials in the cable during production, collection, packaging and transportation (excluding imported waste wires, cable packaging and other substances used during transportation). 4 control standards and requirements 4.1 The radioactive pollution control of imported waste wires and cables shall meet the following requirements: a) prohibiting the mixing of radioactive waste; b) The external radiation penetration value of the waste wire and cable (including the package) does not exceed the normal natural radiation background value of the location of the import port + 0.25 gy / h; c) The surface of the waste wire and cable, the level of radioactive contamination is: the average value of the maximum detection level of 300cm2 of any part of the surface does not exceed 0.04bq/cm2, not exceeding 0.4bq/cm2; d) The specific activity of radionuclides in waste wires and cables should be lower than the limits in Table 1. 4.3 The waste wires and cables should be strictly limited to the following inclusions. The total weight should not exceed 0.01% of the weight of the waste wires and cables. a) closed container; b) oil-sealed cable, optical cable, lead-through cable; c) Identification according to the identification criteria of gb5085.1~gb5085.6, any hazardous waste with one or more dangerous characteristics such as corrosive, toxic, flammable, and reactive; d) Other wastes in the National Hazardous Waste List. 4.4 In addition to the wastes listed in the above, waste wires and cables shall be restricted from the inclusion of other inclusions (including waste paper, wood waste, waste glass, and rust-removed waste). The total weight shall not exceed the weight of imported waste wires and cables. 0.3%. 5 test 5.1 The inspection of Article 4.1 of this standard shall be carried out in accordance with the provisions of sn0570. 5.2 Article 4.3c) and 4.3d) of this standard shall be inspected according to the method specified in gb5085.1~gb5085.6. 5.3 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of sn/t1791.7. Imported solid waste environmental protection control standard used as raw materials Foreword In order to implement the Law of the People's Republic of China on the Prevention and Control of Environmental Pollution by Solid Wastes, strictly restrict the import of solid waste, control the environmental pollution caused by the import of waste hardware and electrical appliances that can be used as raw materials, and regulate the import license for solid waste imports as raw materials. standard. This standard specifies the environmental protection control requirements for imported waste hardware and electrical appliances. This standard is one of the series of environmental protection control standards for imported solid waste. It is applicable to the import management of waste hardware and electrical appliances in the catalogue of imported solid wastes that can be used as raw materials. This standard was first published in 1996 and first revised in 2005. This is the second revision. The main contents of this revision: Increased the requirement for external radiation penetration of imported waste hardware appliances; Adjusted hazardous waste control requirements; The control requirements for general inclusions are tightened. The requirements for the content of recyclable metals in imported waste hardware and electrical appliances have been improved. From the date of implementation of this standard, "Imported Waste Metal Electrical Appliances for Environmental Protection Control Standards for Imported Solid Wastes" (gb16487.102005) shall be abolished. This standard is revised by the Department of Soil Environmental Management of the Ministry of Environmental Protection and the Department of Science and Technology Standards. This standard is mainly drafted by: China Academy of Environmental Sciences. This standard is approved by the Ministry of Environmental Protection on 20 □ □ □ □ □ □ □ □ This standard is implemented from 20 □ □ □ □ □ □ □ □ □. This standard is explained by the Ministry of Environmental Protection. Imported solid waste environmental protection control standard used as raw materials 1 Scope of application This standard specifies the environmental protection control requirements for imported waste hardware and electrical appliances. This standard applies to the import management of waste hardware and electrical appliances of the following customs commodity numbers, including scraps, defective products or non-conforming products produced during the processing of hardware and electrical appliances. 2 normative references This standard refers to the terms of the following documents. For undated references, the valid version applies to this standard. Gb5085.1 hazardous waste identification standard corrosion Gb5085.2 hazardous waste identification standard acute toxicity primary screening Gb5085.3 hazardous waste identification standard leaching toxicity Gb5085.4 Hazardous waste identification standard flammability Gb5085.5 hazardous waste identification standard reactivity Gb5085.6 Identification of hazardous wastes Sn/t0570 imported waste radioactive contamination inspection procedures for use as raw materials Sn/t1791.6 imported waste inspection and quarantine procedures for use as raw materials. Part 6: Waste hardware National Directory of Hazardous Wastes (Ministry of Environmental Protection, National Development and Reform Commission, Ministry of Public Security Order No. 39) 3 terms and definitions The following terms and definitions apply to this standard. 3.1 inclusion-carried in the process of production, collection, packaging and transportation of other materials imported into the waste hardware (excluding the packaging of imported waste hardware and other materials used in the transportation process). 4 control standards and requirements 4.1 The radioactive pollution control of imported waste hardware and electrical appliances shall meet the following requirements: a) prohibiting the mixing of radioactive waste; b) The external radiation penetration value of the waste hardware (including packaging) does not exceed the normal natural radiation background value of the location of the import port +0.25gy/h; c) The surface and radioactive contamination level of the scrap metal appliance is: the average value of the maximum detection level of 300 cm2 of any part of the surface does not exceed 0.04 bq/cm2, not exceeding 0.4 bq/cm2; d) The specific activity of radionuclide in waste hardware and electrical appliances should be lower than the limit of Table 1. 4.3 Waste electrical appliances should strictly limit the mixing of the following inclusions, the total weight should not exceed 0.01% of the weight of imported waste hardware. a) transformers, ballasts and compressors that do not remove insulating oil material; b) a closed container; c) Identification according to the identification criteria of gb5085.1~gb5085.6, any hazardous waste with one or more dangerous characteristics such as corrosive, toxic, flammable, and reactive; d) Other wastes in the National Hazardous Waste List. 4.4 In addition to the wastes listed in the above, the waste electrical appliances shall be restricted from the inclusion of other inclusions (including wood waste, waste paper, stripped rust and waste mechanical and electrical products prohibited by the state), and the total weight shall not exceed the imported waste. 0.3% of the weight of hardware appliances. 4.5 The content of recyclable metal in imported waste hardware and electrical appliances shall not be less than 80% of the total weight of waste hardware and electrical appliances. 5 test 5.1 The inspection of Article 4.1 of this standard shall be carried out in accordance with the provisions of sn/t0570. 5.2 Article 4.3c) and 4.3d) of this standard shall be inspected according to the method specified in gb5085.1~gb5085.6. 5.3 The inspection of other provisions of this standard shall be carried out in accordance with the provisions of sn/t1791.6. Keep abreast of market trends and industry-leading information. Please download the official website of Shanghai Non-ferrous Network. You can view the [Live] newsletter in the [Information] section. More exclusive data and exclusive news are essential weapons for you to join the metal market.
Substation Fitting also means high-current bus-bars fitting, it complete with power distribution unit fix in the power station and substation, it support CORD, rope-lay stranded conductor and each for rigid busbar,it according to busbar to differentiate, it have rectangular bus bars, rhombus bus bars and flexible busbar fix fitting.
If you have any questions, please contact with us directly.
Substation Fitting Substation Fitting,Electric Power Fitting,Bolted Type T Connector,Substation Connectors Shandong Vantage International Trade Co., Ltd. , https://www.steelplate.be
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.
/*kangxianyue 250*250 was created on 2017/3/29*/ var cpro_id = "u2939694";