Today, the integrated ceiling is a decoration method that many owners choose. If you want to assemble an integrated ceiling , you don't know much about integrated ceilings. The following Xiaobian explains how to integrate the ceiling installation method and the process of integrated ceiling analysis. I hope to help you. To everyone!

First, integrated ceiling installation method - the installation of six screws

1, according to the first measurement of good size, drilled in the ceiling, the expansion tube screw screw in, pay attention to the height of the ceiling and the ceiling is not less than 625px, the screw must be perpendicular to the top, and fixed firmly, the six screws remain parallel .

2. Obtain six points on the ceiling and drill them with a hammer. Measure the distance from the ceiling to the corner line to obtain a short screw with a practical distance of 8-250px. Screw the nut on one side and screw the expansion screw on the other side. Screw the nut on the other side and put the main keel suspension on it. Into a nut fixed.

Second, integrated ceiling installation method - keel installation

1. Compared with the size of each kind of hanging piece, the main keel is set on the hanging piece to obtain the required size, and the main keel is parallel after being mounted.

2. Put the triangle hanging pieces into the triangular keel in order, and secure them on the main keel. The clearance of each keel is adjusted to 300mm. The outlet ducts of the range hoods are arranged in front of the gussets and are not required if no range hoods are installed.

Third, the integrated ceiling installation method - install the buckle board

1. At first, put the connector into the already fixed triangle keel, and get the length to be put into the other end of the connector, and intersperse the connection.

2, install the buckle board. To remove the film on the four sides of the gusset plate, install it according to the mounting arrow on the membrane.

3. Insert the split gusset plate into the triangular keel. Place the cut surface on the edge strip. At the same time, drag the card edge of the edge strip and press the gusset plate tightly.

Four, integrated ceiling installation method - installation of electrical appliances

1. Place the corner of the retainer into the round hole of the box and use the screw to insert the retainer into the round hole and tighten it. The box body with the snap spring installed is placed on the keel. The open slots of the four snap springs are pressed in turn against the triangular keel, and the electrical box body is firmly locked on the triangular keel.

2, then open the junction box, according to the corresponding function to connect the label, the switch is installed to test whether there is electricity, after the power on the junction box on it, and here to install the integrated ceiling is basically completed.

Summary: The above is the introduction of the integrated ceiling installation method for integrated ceiling installation and the analysis of the integrated ceiling process. If the home wants to install an integrated ceiling, you can learn from it! If you want to know more about the consultation, please continue to pay attention to Qijia.

Integrated ceiling installation method

Garden Gate Square,include single swing gates and double swing gates Square.They are made of square frame and Wire panel infill.

treatment surface :black+hot dip galvanized ,galvanized +epoxy coated to clor RAL6005/RAL7016/RAL9005.

Accessories for single and double gate .include lock.hinge,gate stop,handle,etc.

Size or color other than mention above can be produced as per customer's request after confirmation.

Garden Gate Square

Metal Garden Gates,Galvanized Single Swing Gate,Metal Fences And Gates,Garden Gate Square

HeBei Fortune Trade Co.,Ltd. , https://www.gardfence.com

Posted on