As we all know, there are two methods for laying floor tiles, one is dry and the other is wet. There has always been concern that these two methods, how to lay the effect, which one is better? In fact, the difference between dry shop and wet shop is: 1, dry shop is actually a method of laying marble, 1:3 cement mortar, hand into a group, landing flowers. The dry shop is less likely to be hollowed, and it is also more economical and saves construction time. However, the dry mortar thickness is relatively large (3~4CM). If the large size brick is used in the living room, dry shop can be used. 2. The wet shop is directly applied to the concrete behind the bricks, and then it is directly laid on the wall or the ground. The tiles on the walls are all wet, and the small tiles and the ground have better flatness, so the wet shop is better, and the ground can be saved. thickness. 3. The quality of the two methods is the same. The choice of method depends on the specific situation. (Generally, the decision made by the mason is correct.) General kitchens and bathrooms are wet, and the living room can be dry. Dry shop floor mortar requires a certain thickness (at least 3 ~ 4CM), kitchen floor thickness is certainly not enough to wet shop. 4, Hollow problems and detection There will be a hollow problem when the paving tiles are finished and checked. How to detect empty drums? The first thing to know is how emptying is done because bricks have a higher moisture content and must be considered when pasting. Before the tiling, the base layer should be fully moistened with water, and the tiles should be fully dried in the water for at least 20 minutes. Otherwise, the moisture in the mortar is quickly absorbed by the dry base layer and ceramic tile and quickly condenses, which will affect the bonding fastness. The wall tiles will absorb moisture from the cement, so that the cement can not play the role of the paste, resulting in dewatering of the cement mortar. Affect the coagulation hardening, emptying, shelling and other issues. Detection: When the tiles are dry, with a rubber mallet, randomly hitting the brick surface, knocking on each place, listening to the sound is easy to hear if there is no emptying below, knocking a few times is not wrong. Floor Cement Floor Tiles Marble Tiles Kitchen Wall Tiles Marble Floor Tiles Bathroom Wall Tiles Bathroom Tiles Floor Tiles Kitchen Tiles Tiles Specifications Pdc Cutter For Grinding,Pcd Grinding Plates For Grinding,Polycrystalline Diamond Insert For Cutting Tools,Pdc Shoes For Grinding Henan Bohong New Material Co., Ltd , https://www.bohongpcd.com