In detergents, detergents are mainly surfactants and are mixed with certain adjuvants. The addition of adjuvant not only reduces the cost of finished detergent, but also improves the detergent decontamination ability, improves the appearance of detergent, and makes the detergent more convenient for use. In addition, a small amount of functional auxiliary ingredients (additives) are usually added to improve the comprehensive properties of washing.
Disodium EDTA,Tetrapotassium Pyrophsphate,Trisodium Phosphate,Sodium Tripolyphosphate Jiangsu Kolod Food Ingredients Co., Ltd. , https://www.kolodchem.com
/*728*90 created on 2018/5/16*/ var cpro_id = "u3440131"; Home>Bearing knowledge>How to reduce the wear on the clutch during the use of the car Ways to reduce wear on the clutch during use of the car
In order to reduce the wear of the clutch; first of all, it must be clear that the layout of the clutch cylinder is placed on the input bushing of the transmission; it is based on the clutch pressure plate to supply the return force to the sub-pump through the separate bearing; therefore, the bearing is always separated from the bearing. Disk touch. When the clutch pedal is depressed; the clutch platen and the pressure plate are separated by the separate bearing. The driver steps on the clutch pedal; the initiator transmission is disconnected from the transmission; the engine power is not transmitted to the wheel for use. Drive the car. When the driver releases the clutch; the transmission of the initiator will be connected to the transmission; thus the power is transmitted to the wheel. /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';
Pay attention to the following methods to reduce the wear of the clutch. Use the first gear to start; to get the maximum torque at the start; reduce the clutch overload. Reduce the clutch in the semi-coupling condition; the clutch pedal should be stepped on during operation; Make sure that the clutch is completely disconnected and securely connected. After the start is successful, the clutch should be loosened quickly; the clutch platen and the tablet are not necessary to conflict.
Do not put your foot on the clutch pedal during normal travel; to ensure sufficient engagement inside the clutch.
Recommend to friends comments close window Bearing related knowledge What are the methods and parameters of the slewing bearing? The basic layout of the deep groove ball bearing and the analysis of the good and bad online how to correct the paper machine bearing?
Ball bearing strengths and defects
KOYO company bearing code
This article links to http://
Please indicate the bearing network http://
Previous:The demand and basic function of bearing steel Next edition: SKF imported bearing repair guidelines and methods
Auxiliaries refer to the auxiliary components in synthetic detergents, which are related to decontamination and can increase washing characteristics. Most of the auxiliaries are inorganic, mainly Phosphate, 4A zeolite, silicate and Carbonate. In addition, organic chelating agents also belong to the category of auxiliaries.
Auxiliaries can be divided into inorganic auxiliaries, according to their functions in detergents, they can be divided into mixtures, foaming agents, defoamers, thickening (viscosity) agents, solvents, pearlescent agents, preservatives, bleaching agents, bactericides (disinfectants), antioxidants, softeners, antistatic agents, friction agents, fluorescent brighteners (FWA), solvents, anti-fouling and re-deposition. Agents, enzymes, flavors, pigments, etc.
Source: China Bearing Network Time: 2018-07-29