Steel enterprises have the benefit of environmental protection and power

As China's steel industry resolves excess capacity and cracks down on the release of the “strip steel” policy dividend, the company's efficiency has improved significantly, and there are sufficient funds to implement environmental protection facilities and technological transformation and upgrading. It is in a position to have the ability to solve outstanding problems in the ecological environment. "window period". Under the "differentiated" environmental protection policy, the resolution of excess capacity and the suspension of production will be linked to the level of environmental protection. Steel companies must change their concepts and lead environmental protection.

Recently, the 2018 (ninth) China Energy Conservation and Emission Reduction Forum was held in Beijing with the theme of “ultra-low emission green development – ​​building ecological civilization”. Li Xinchuang, dean of the Metallurgical Industry Planning and Research Institute, said that the construction of ecological civilization is in a crucial period. Only by clenching the teeth and climbing the slopes can the Chinese industry truly achieve high quality development.

At present, environmental protection issues have received much attention. In 2017, China's output was 832 million tons, accounting for about half of the world's total output, and it was mainly concentrated in key areas such as Beijing-Tianjin-Hebei, Yangtze River Delta and Handan Plain, which had an important impact on regional environmental quality. According to reports provided by the Metallurgical Industry Planning and Research Institute, most of the cities with lower air quality rankings have coking enterprises. At the same time as the improvement of ambient air quality in the Beijing-Tianjin-Hebei region, the air quality in the Yangtze River Delta region deteriorated from January to February 2018, and PM2.5 increased by about 20%. This change is in line with the trend of steel production in the above two regions. Positive correlation.

Not long ago, the "Three-Year Action Plan to Win the Blue Sky Defence War" issued by the State Council proposed that after three years of efforts, the total amount of major air pollutants will be greatly reduced, and greenhouse gas emissions will be reduced in concert to further reduce fine particulate matter (PM2.5). Concentration, significantly reducing the number of days of heavy pollution, significantly improving the quality of the ambient air, and significantly enhancing the people's blue sky happiness.

As a “two high” industry, the industry is faced with tasks such as upgrading and upgrading pollution control, and the most stringent “ultra-low emission” standards in the industry will also be implemented. Li Xinchuang pointed out that although the environmental protection work has made positive progress in the past 10 years, the emission of tons of steel such as sulfur dioxide and particulate matter has dropped by more than 60%. However, due to the large steel output in China, the emissions of sulfur dioxide, nitrogen oxides and particulate matter are high. Ranked third, third and first in all industrial sectors. “It can be said that the prevention and control of air pollution in the industry has just entered the deep water area.”

The industry is a pillar industry in Tangshan City, Hebei Province. After the joint efforts of local governments and enterprises, Tangshan City completed the task of special emission limit management in the industry one year ahead of schedule. According to Wu Jianjun, director of the Atmospheric Department of Tangshan Environmental Protection Bureau, in 2018, in accordance with the principle of “determining to get down, measures once and rectified once,” the local government issued the “Tangshan City Enterprise Environmental Protection Improvement Special Action Implementation Plan”. Xingtai Delong, all enterprises are governed according to ultra-low emission standards, and comprehensively build green eco-steel enterprises. As of the end of June, there are more than 100 sintering (pellet) equipment in Tangshan City that need to be denitrified, and 7 units have been built. It is expected to be completed at the end of October.

Hegang Steel is an important production base for high-quality plates and special steels in the country. After energy-saving renovation, its main pollutants have achieved ultra-low emissions. The steel mill with an annual output of 13 million tons of steel is only equivalent to steel with an annual output of 3 million tons of steel. Factory emission level. The company also undertakes the key special projects of the national key research and development plan "Research on the causes and control technologies of atmospheric pollution", carries out special research and development, and strives to build a whole process control coupling technology system for energy-efficient multi-pollutant source reduction, process regulation and terminal treatment. It solves the problems of large amount of smoke, long process and high cost, and realizes large-scale preparation of key materials and industrial application of key technologies. Jia Guangru, deputy general manager of Hegang Steel, said that through continuous technological advancement, the company's energy efficiency and environmental performance have been greatly improved, achieving clean production and green development. In the future, we must adhere to the green development concept and strive to be a model leader in the green transformation of the new era.

Participants generally believe that the conditions for deepening industrial restructuring, energy structure adjustment, and transportation structure adjustment are basically mature. As China's industry resolves excess capacity and cracks down on the release of the “strip steel” policy dividend, corporate benefits are significantly improved, corporate profit levels are guaranteed, and sufficient funds are available to implement environmental protection facilities and process upgrades and upgrades. A “window period” to solve outstanding problems in the ecological environment. At the same time, in view of the large differences in environmental protection levels among steel companies, the relevant policies have shifted from “one size fits all” to “differentiated”, which has forced the enterprises with backward environmental protection to form. The 2017 Beijing-Tianjin-Hebei and Surrounding Area Air Pollution Prevention and Control Work Plan clearly states that the enterprise heating season should implement differentiated stop-and-limit production measures in accordance with the company's environmental performance.

"Under the new situation, steel enterprises must change their concepts and regard environmental protection as a 'leading', and strive to test perfect scores!" Li Xinchuang stressed that it has entered a period of reduction and development, and under the guidance of "differentiated" environmental protection policies, overcapacity The production capacity and production limit will be linked to the environmental protection level. The idea that “everyone is similar” and “the law is not responsible” is not in line with the current environmental protection situation. In the future, some steel companies that are not up to standard will have to withdraw. Only by implementing the lean environmental protection strategy, the environmental protection work is striving for excellence, and striving for the “green development benchmark enterprise” can win the space for survival and development.

1.Application : For medical care
2.Dimension: Customized dimension, OEM & ODM
3.Material: A6063, A6061, A3003 and other series alu alloy        
4.Suface treatment: Anodizing, polishing, turning ,power coating, mill finish etc
5.Equipment: CNC ,extruding machine, cold drawn machine, heating oven, straightening machine, cutting machine  

6. STANDARD PACKING:Wooden case/carton

7. Trade Terms
1. Payment: 30% T/T in advance, 70% balance pay before delivery.  L/C at sight.
2. Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.
3. Trade Term can be chosen depending on your requirements.
4. FOB Port: Shanghai

Seamless Tube For Medical Care

Seamless Tube For Medical Care,Medical Aluminum Seamless Tube,Aluminum Anodized Tube For Medical,Medical Aluminum Seamless Pipe

Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com