The disassembly procedure of the fan is different due to the different structure of the fan. The disassembly procedure is very different, and it is generally explained in the fan manual, so it will not be introduced here. The following are only some points to be noted when disassembling: 1. Before disassembling, in addition to preparing the tools and materials for disassembly, for the fans that transport gas or other harmful gases, you must first put the inlet and outlet pipes in the The gate is closed tightly, and a blind plate needs to be plugged if necessary. If the inlet and outlet are downward, water can be poured into the lower pipe to seal the water. The height of the injected water level should ensure that the harmful gas in the pipeline does not leak into the workplace. 2. When disassembling the fan lubricated with oil by pressure, the lubricating oil should be drained and filtered before cooling, and then the flange connecting the oil pipe and the body should be disconnected. 3. When lifting the upper casing or rotor, keep the horizontal position to avoid damaging the machine parts. The longitudinal joint surface of the casing of the multi-stage blower should not be disassembled. For example, the cast iron casing that exhausts hot gas must wait for the inside of the casing to cool before lifting the upper casing. 4. Before removing the sliding bearing, the bushing clearance and thrust face clearance should be measured. The seal gap should be measured before removing the seal. 5. When disassembling, check whether the removed parts have printed marks. For some parts that need to be printed but not printed, it must be printed again to facilitate the assembly and restore the position. The parts that need to be printed include the parts that cannot be installed in the wrong position or direction and affect the balance, such as keys, covers, bushings and their gaskets, couplings and pins, air inlets and shafts of centrifugal fans Detachable blades for flow fans, etc. 6. After disassembly, the disassembled parts should be cleaned to remove dust and dirt. If you are interested in the purchase of fans produced by Guangzhou Xinfeng Fan Co., Ltd. or need technical support, please call to consult Oval Wire,Oval Indent Wire,Concrete Steel Wire,Concrete Steel Strand Wire Shandong Xindadi Holding Group Co., Ltd , https://www.xindadipcwire.com
================================================== ================================================== ======
Company Name Guangzhou Xinfeng Fan Co., Ltd. Contact Miss Wu Department Marketing Department Phone 400-088-0118 Fax 020-81692660 Mobile 13928867400 Email Website Address No. 1 Lianxing Road, Shilou Town, Panyu District