Note: The helmet and its cap must be compatible and designed for each other (for example, HDPE helmets must use the corresponding caps). If they are not used together properly, the helmet's protective function may be compromised, which could lead to serious injuries or even fatalities. Inspection Procedure Before and after each use, always inspect your helmet for signs of wear or damage. This is a critical step in ensuring your safety at all times. Cap Shell Inspection 1. Check the shell of the helmet for any cracks, dents, or deformities.
2. Look for any signs of damage that might compromise the structural integrity of the helmet.
If the shell shows any of these issues, do not use the helmet. These conditions indicate that the helmet can no longer provide adequate protection against impacts, penetration, or electrical shocks. Cap Liner Inspection 1. Examine the cap liner to see if it has lost its elasticity or feels stiff.
2. Check for any breaks, tears, or peeling on the liner.
If you notice any of these problems, replace the cap liner immediately before using the helmet again. Helmet Maintenance Regular cleaning is essential to maintain the performance and longevity of your helmet. Use a mild detergent or neutral soap with warm water to clean the exterior. A clean helmet ensures proper inspection and helps prevent skin irritation.
Avoid throwing the helmet or using it as a support. Treat it with care, just like any other professional safety equipment. Effective Service Life Even though helmets are made from high-quality materials, they are not meant for indefinite use. It’s important to regularly check your helmet and replace it or its components when needed. Never take risks with your safety.
The entire helmet should be replaced after two and a half years of use. However, this is the maximum recommended lifespan. If you notice any damage or wear during inspections, replace the helmet or the cap liner immediately, regardless of how long it has been in use.
In the event of a collision or penetration, the helmet must be replaced right away. Safety should never be compromised. Note: Failing to follow these guidelines can result in severe injury or even death. The helmet is designed to offer limited protection against impacts and penetration from above. It is not intended to protect against front, side, or back impacts. While it can effectively guard against small falling objects such as tools, bolts, or rivets, there are situations where the helmet may not provide sufficient protection, leading to serious harm.
Always wear the helmet securely, with both the top and bottom straps fastened for maximum protection.
Do not place items such as gloves, cigarettes, or earplugs between the cap liner and the shell. These items can cause serious injury during an impact.
Never use this helmet as a motorcycle or sports helmet.
Inspect the helmet before and after every use, and replace any damaged parts promptly.
Do not exceed the service life specified in the instructions. Replace parts or the entire helmet as required.
Do not alter or modify the helmet in any way.
Avoid using paints, solvents, or hydrocarbon-based cleaners (such as MEK, thinner, gasoline, or kerosene) on the helmet, as they can cause hidden damage over time. China Labor Insurance Network PVC Fabric High Speed Rolling Doors PVC fabric material high speed rolling doors can open and close in a very fast speed, to improve work efficiency and also keep inside room clean by preventing dust. This type rapid doors are very cost effective to save your one-time purchase cost and also future maintenance cost. Simple and stable design make such PVC fast door very stable and low maintenance level. You will feel at ease to use such PVC fabric material high speed roll up doors in your factory and warehouse. PVC High speed doors, PVC rapid rolling doors, PVC fast roller doors, PVC fabric rolling doors, PVC fabric high performance doors SHANGHAI KENVO DOOR CO.,LTD , https://www.kenvodoor.com